acme:
- acme.sh chmods its tree to owner-only (700/600) every run, which
broke the two-user model: a tree left owner-only by one user made
every acme.sh call of the other exit 2
- normalize_acme_home() reopens group access (sudo chmod g+rwX,
files only — setgid dirs trip RestrictSUIDSGID); _run_acme_preflight
is the choke point before every daemon acme.sh call + startup
- acme service now runs as the daemon user; --log persists the raw CA
transcript; SYS_LOG=6 journals manual issue/renew runs
- timer daily-only: two runs/day landed inside ZeroSSL's 24h
validation backoff (Retry-After: 86400) — a permanent renewal lockout
- _collect_acme no longer raises on cert-list failure; reports
status.error (AcmeState.status) so the certs page can surface it
firewall: re-stamp the applied baseline on live zone mutations
(interfaces/services/rich-rules/masquerade/forward-ports) so cancel-all
reverts to post-mutation state, not a stale install-era snapshot;
set_masquerade syncs the declarative config for existing zones;
add_forward_port records toaddr only with toport
status: apply-all accepts {"force": true} (forwarded to the firewall
apply only); ApplyConfirm force checkbox; applyResultToasts() — the
errors map wins over the 200; ActionButton checks errors before the
success toast; dashboard uses ApplyConfirm
system_import: drift re-imports carry the existing apply-meta; first
import stamps the adopted content as applied (it is the running state)
— no phantom pending changes
nginx: get_config only re-saves when migration actually changed the
config (no more owner/mtime churn on every read)
install: repair mis-owned top-level system dirs (tmpfiles
unsafe-path-transition), warn with a full-repair command for deeper
mis-ownership
daemon/server: loop.get_exception_handler() (aiohttp API fix)
tests: 888 pytest + 24 node passing; ruff clean
Post-DHCP-incident hardening per HARDEN.md.
- apply guard: refuse (ConflictError, `force` overrides) when a
network-managed interface would end up in no zone; absent
`interfaces` key = hands-off, explicit `[]` = unassign-all
- surface `uncovered_interfaces` in firewall state (lo/wg* filtered)
+ advisory in /api/status/pending; zones.js banner + interfaces-picker
last-zone confirm
- target drift (Option A): absent or default-normalizing target is
unmanaged: not diffed, never re-set by apply; create_zone runs
--new-zone first and sets non-default targets only; importer omits
the target key for default zones
- FirewallToDhcpSync keeps stale DHCP ranges and flags them instead of
deleting; `dnsmasq` affected only on a real gateway mutation
- real pre-apply recovery snapshot in data/firewall/rules.json
({timestamp, default_zone, zones, config}); drop the empty post-apply
skeleton
- daemon shutdown: bounded grace for in-flight tasks + suppressed
teardown exception noise on SIGTERM
- also carries the firewall service-descriptions feature
(get_service_descriptions + service_descriptions state field + UI)
- tests + docs across firewall/status/state/sync/schema; ruff clean,
867 passing
- daemon: send full snapshot on connect; versions/tick now carry the
full state of one subsystem (subsystem + data); no legacy
updated/subsystems payloads; refresh_state and POST /status/refresh
broadcast per-subsystem versions with data
- client: modelSet() patches models in place; onMessage/topic refresh
retired; 3s initial-load fallback via new POST /api/status/refresh
- schema: lib/schema.py TypedDicts + hoover/schema.js defaults +
docs/state-model.md as single source of truth for state shapes
- system: poll at 1s, volatile metrics registered, dashboard uses a
dedicated system model (status model removed)
- firewall: refuse to strip both https and ssh from the default zone
(409, force override via UI confirm); set_zone_services persists
services to the declarative config; collector exposes default_zone
- UI: pages migrate to flat state shapes; post-mutation modelFetch
refreshes removed (WS delta covers it)
- tests: ws snapshot/delta/broadcast, refresh-state, schema types,
model-set/js ws handler and reconnect fallback
- websocket.js passes the raw JWT as the Sec-WebSocket-Protocol subprotocol (no 'Bearer ' prefix): subprotocol names must be valid RFC 6455 tokens, and the space in 'Bearer <token>' made the browser reject the constructor with a SyntaxError.
- daemon accepts a JWT-shaped subprotocol plus the legacy 'Bearer <token>' form via _extract_ws_token; unit tests in tests/test_ws_auth.py.
- vdom.js applies inline styles through el.style (CSSOM) instead of setAttribute, which the management-domain CSP (no 'unsafe-inline') blocks.
- install.sh opens http/https/ssh on the public zone alongside WAN setup.
- docs (hoover.md, security.md) updated to match.
Refresh/logout and token robustness
- drop the post-rotation refresh_tokens row delete in auth_refresh so
logout blacklists the current (rotated) refresh token; remove the
dead _clear_refresh_token_after_rotation helper and clear_active_refresh_token
- reject non-object JWT payloads in _extract_unverified_sub so crafted
Authorization headers return 401 instead of crashing with 500
SQLite user store
- make builtin-admin seeding idempotent: on a concurrent first start the
losing seeder re-checks, finds the winner, and returns instead of
raising IntegrityError
- per-thread sqlite connections + busy_timeout so Flask worker threads
don't hit cross-thread ProgrammingError / SQLITE_BUSY
- add LogsDirectory + /var/log/vacuum-wall to ReadWritePaths in both
systemd units so the fallback admin password actually lands on disk
Frontend
- skip apiFetch 401-recovery for public auth endpoints so a failed
login no longer logs out a valid session
- add /passkeys to the nav (passkey registration was unreachable);
remove the dead checkWebAuthnCapable export
- drop the CSP-blocked inline WS-URL script and the
__WS_URL_PLACEHOLDER__ plumbing; the WS URL is derived from location
Daemon / WS
- parse Sec-WebSocket-Protocol manually (web.Request.get_subprotocols
does not exist in aiohttp 3.13); X-Auth-Token is a custom-nginx
fallback only — docstring and security docs corrected
Install / system
- bootstrap_auth.py is now idempotent: preserves existing auth config
and syncs the admin password on re-runs (new reset_password helper)
- WebUI server block renders auth_basic off (the UI is JWT-protected)
- install.sh chown/chmod skips .git to avoid git dubious-ownership
breakage
- tolerate unreadable /etc/wireguard during system import
Contracts / docs
- create_user returns 409 on duplicate username per docs/api.md
- correct docs/api.md response shapes, docs/security.md blacklist
cleanup wording + one-refresh-per-user caveat, stale WS-URL
references, and the .htpasswd description
Tests: +7 regression tests (rotation/logout revocation, crafted-token
401, concurrent seeding); placeholder-substitution tests replaced with
serve-as-is SPA root tests.
- Make session_id parameter optional in validate_token — only enforced when
provided, allowing WebSocket auth which cannot carry custom headers
- Remove decode_token round-trip from daemon WS handler
- Override WebAuthn registration username from JWT user_ctx to prevent users
from registering credentials under another user's account
- Frontend no longer sends username for WebAuthn registration
- Redirect to login on 401 after token refresh fails for POST requests
- Remove redundant auth session check from login page load
- Add tests for session_id semantics and WebAuthn ownership guard
Browsers cannot send custom X-Session-Id header on WebSocket connections,
so decode the token payload to extract session_id. Add WebAuthn
success/failure recording to support rate limiter counter resets.
Session binding was bypassable: if the X-Session-Id header was absent,
validate_token skipped the check entirely, allowing a stolen JWT to be
used without the originating session.
Server-side: reject 401 early in Flask middleware and daemon WebSocket
handler when X-Session-Id is missing, before calling validate_token.
Updated validate_token to always enforce session_id matching for access
tokens (refresh tokens are unaffected as they carry no session_id claim).
Frontend: removed dead if (stored.session_id) guards in api.js since
the header is now always required. Added X-Session-Id to logout request
headers and always store session_id on login/refresh.
- Rate limiter tracks failures only; success resets counter
- Record failures/successes after password verification, not before
- WebAuthn rp_id/origin resolved dynamically from request domain
- Management domains auto-discovered from nginx backend config
- All WebAuthn operations validate domain against management list
- Add GET /api/auth/webauthn/capable endpoint for frontend checks
- Frontend checkWebAuthnCapable() function for domain-gated UI
- Timing side-channel fix: pre-compute dummy hash at module load
- Builtin admin seeded with random password (logged at WARNING)
- Logout handler returns consistent response shape
Add docstrings to all handler functions in daemon/handlers/firewall.py, covering
params, return values, and raised exceptions. Add inline comments to
_config_apply() reconciliation steps and the request body merge order.
Add docstrings across lib/ modules for emit helpers (_emit_str, _emit_int, etc.),
volatile stripping logic, two-layer diff strategy, sync event dispatch, and all
cross-subsystem sync subscribers (DnsToFirewall, WgToFirewall, FirewallToDhcp,
NetworkToAllSync).
Document WireGuard/networkd config parsers and key-value mappers in
system_import.py. Add docstrings to _ep(), Registry.decorator,
setup_logging, and _replace helper across daemon/ and lib/.
- lib/system_import: new module to import system configs into JSON at daemon startup
- daemon/server.py: call import_all() during startup for config reconciliation
- daemon/handlers/nginx.py: simplify add_domain auth handling, remove duplicate code
- scripts/install.sh: replace inline Python setup with curl-based daemon API calls; apply IP forwarding at runtime
- hoover: bump internal asset versions to v=8
- pages: bump asset versions to v=9
- update-vendor.sh now creates webui/vendor symlinks (htm.js)
- install.sh calls update-vendor.sh after package install
- Add vendor/.empty and webui/vendor/.empty as directory placeholders in git
- Replace per-zone --list-all calls with single --list-all-zones in _collect_firewall
- Add _parse_all_zones_output() parser with rich rules/rich-rules normalization
- Convert daemon shutdown to async with proper runner cleanup and socket unlink
- Add TimeoutStopSec=15 to vacuum-walld.service for graceful stop
- Fix exception handling in _collect_dnsmasq
- Remove management badge from proxy path rows
- Move acme.sh utilities (_run_acme, _find_acme, etc.) from lib/state to lib/acme
- Rewrite _parse_list_output to support pipe, tab, and column-separated formats
- Add ConflictError (409) to block issuing when cert already exists
- Move _find_issuance helper to detect in-progress issuance per domain
- Update issue_cert to check existing certs and return issuance status
- Fix start_polling to accept event loop explicitly
- Add sudoers entry for chown on vacuum-wall.conf
- Extend systemd ReadWritePaths for /run/nginx.pid and /var/log/nginx
- Update frontend to handle 'existing' issuance status
- lib/state.py: per-subsystem collectors with versioned state store
- daemon/server.py: state refresh on request, batch routing updates
- webui/static/hoover/html.js: new html tag template helper via htm.js
- webui/static/hoover/websocket.js: real-time state change notifications
- webui/static/hoover/vdom.js: VDOM improvements for keyed diff
- All frontend pages refactored to use html templates
- Add tests for state management and polling
- Update docs and AGENTS.md
Phase 1-4: Networkd subsystem
- lib/network.py: systemd-networkd config renderer (.network INI files)
with full schema support: [Match], [Link], [Network], [Address], [Route],
[DHCPv4], [DHCPv6] sections. One Address/=DNS= line per value per spec.
Route sections use #N suffix per systemd.syntax(7).
- lib/network.py: generate_network_files() with 50-<name>.network prefix
and stale file cleanup
- lib/network.py: collect_upstream_dns() filters local/private DNS
- lib/network.py: infer_dhcp_ranges() and infer_zones() helpers
- daemon/handlers/network.py: routes for GET/POST /network/interfaces
and full apply with DNS upstream sync to dnsmasq
- webui/api/network.py: Flask blueprint for /api/network/* endpoints
- webui/api: interfaces page updated with IP config inline editing
- lib/state.py: networkd collector using parse_networkctl_status()
- system/sudoers.d/vacuum-walld: networkctl + systemd-network rules
- system/systemd/vacuum-walld.service: ReadWritePaths for /etc/systemd/network
- install.sh: ACME email now optional, configured from WebUI
- lib/acme.py: get_email() falls back to declarative config
Phase 5: Code review fixes
- daemon/server.py: path params now win over JSON body and query params
in request body merge (prevents config save name override)
- daemon/server.py: remove dead 'import re'
- daemon/handlers/network.py: replace Path.mkdir() with sudo mkdir
for /etc/systemd/network (ProtectSystem=strict compatibility)
- system/sudoers.d/vacuum-walld: pin systemctl to specific commands
(reload/is-active dnsmasq instead of wildcard)
- system/sudoers.d/vacuum-walld: restore !requiretty and section comment
- lib/network.py: remove unused _MANAGEMENT_PORTS constant
- webui/api/network.py: remove redundant body[\name\] = name in save_interface
Tests: 332 passing (110 new/updated), ruff clean
Add comprehensive docstrings to firewall, DHCP, proxy, wireguard, certs,
and logs API endpoints. Document parameters, return values, and error cases
for the documentation system.
- Add daemon/ module with aiohttp server, sync client, and handler registry
- Add daemon/handlers/ for privileged operations (acme, dnsmasq, firewall, logs, nginx, wireguard)
- Add system/acme-deploy.py, vacuum-walld sudoers and systemd service
- Update API routes to use daemon client instead of lib/ directly
- Update lib/, tests/, and webui/ for new architecture
- Update docs and deployment scripts
mteehan